ST-LINK/V2

ST-Link V2는 ST Microelectronics의 STM8 and STM32 Microcontroller Families의 모든 제품에 사용 가능한 In-Circuit Debugger and Programmer 입니다. JTAG/SWD인터페이스를 이용해서 STM8 와 STM32에 프로그램 라이팅, 디버깅을 할 수 있습니다

 

 

특징

  • 5 V power supplied by USB connector.
  • USB 2.0 full speed interface compatible.
  • USB standard A to Mini-B cable provided.
  • SWIM specific features:
    • 1.65 V to 5.5 V application voltage supported on SWIM interface.
    • SWIM low speed and high speed modes supported.
    • SWIM programming speed rate:
      • 9.7 Kbytes/s in low speed,
      • 12.8 Kbytes/s in high speed.
    • SWIM cable for connection to an application with an ERNI standard connector vertical (ref: 284697 or 214017) or horizontal (ref: 214012).
    • SWIM cable for connection to an application with pin headers or 2.54 mm pitch connector.
  • JTAG/serial wire debugging (SWD) specific features:
    • 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs.
    • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
    • JTAG supported
    • SWD and serial wire viewer (SWV) communication supported
  • Direct firmware update feature supported (DFU)
  • Status LED which blinks during communication with the PC
  • Operating temperature 0 to 50 °C
  • 2500 VRMS high isolation voltage (ST-LINK/V2-ISOL only)

 

핀번호

 

드라이버

최신 ST-Link V2 드라이버는 화이트앳 ST-Link 드라이버 자료실(http://whiteat.com/index.php?mid=sw_pds&package_srl=228213) 에서 받으실수 있습니다.

 

사용예

ST-LINK V2 는 STM32 ST-LINK Utility ,  KEIL uVision 에서 사용할 수 있습니다.

 

연결

컴퓨의 USB에 USB 케이블을 연결하고 20핀 플랫케이블은 STM8 또는 STM32 보드에 연결합니다.

ST-LINK 에서는 보드에 전원을 공급해주지 않습니다. 필히 보드에 별도의 전원을 공급해줘야 합니다.

 

STM32 ST-LINK Utility 에서 사용

STM32 ST-LINK Utility 로 ST-LINK V2 를 사용하는 방법입니다.

http://docs.whiteat.com/?p=3048  

   

  

 

 


KEIL uVision에서 사용

KEIL uVision 로 ST-LINK V2 를 사용하는 방법입니다.

http://docs.whiteat.com/?p=3050

   

   

   

 

제품 구매

ST-LINK V2 제품은 http://kit128.com/goods/view?no=189 에서 구매하실 수 있습니다.


'전자 키트' 카테고리의 다른 글

WAT-LED  (0) 2013.04.08
WAT-AT45DB SPI 데이터 플래시  (0) 2013.04.08
WAT-GLCD 그래픽 모노 LCD 모듈  (0) 2011.12.12
WAT-CLCD, 캐릭터 LCD 모듈  (0) 2011.10.31
PONYPROG 사용방법, 라이팅 속도 향상시키는 방법 포함  (0) 2011.10.02
Posted by WhiteAT
,

USB2.0 MINI 5p cable 미니5핀 케이블

USB2.0 MINI 5p cable 미니5핀 케이블.

 

 

USB 2.0 미니 5핀 케이블입니다.

  • 길이 : 1m
  • 커넥터1: USB-A Male
  • 커넥터2: USB Mini-B Male
  • 버전: USB 2.0 High Speed

 

 

 

제품 구매

USB 2.0 Mini 5pin cable 미니 케이블 은  http://kit128.com/goods/view?no=264 에서 구매하실 수 있습니다.


'전자/일반' 카테고리의 다른 글

작은 십자 드라이버  (0) 2016.04.20
빵판에서 사용 가능한 푸쉬,리셋 스위치  (0) 2016.04.20
다양한 저항 종류 – 용량  (0) 2016.03.31
체리, ON/OFF 제어 방식  (2) 2012.11.28
PID 제어  (4) 2012.11.28
Posted by WhiteAT
,

 

1/8W 저항

0.125W 저항은 작은 사이즈에 작은 용량이라 매우 작은 전력에 사용해야 합니다.

   

   

1/4 W 저항

0.25W 저항은 일반적으로 많이 사용되는 저항으로 주로 탄소피막저항 입니다.

'전자/일반' 카테고리의 다른 글

빵판에서 사용 가능한 푸쉬,리셋 스위치  (0) 2016.04.20
USB2.0 MINI 5p cable 미니5핀 케이블  (0) 2016.03.31
체리, ON/OFF 제어 방식  (2) 2012.11.28
PID 제어  (4) 2012.11.28
서보 모터 제어 방법  (1) 2012.11.15
Posted by WhiteAT
,