화이트앳-ATMEGA128,AVR 정복,아두이노,Cortex-M3

STM32F103R6T6A

DATA SHEET:

STM32F103x6.pdf

Features

ARM 32-bit Cortex™-M3 CPU Core

– 72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access

– Single-cycle multiplication and hardware division

■ Memories

– 16 or 32 Kbytes of Flash memory

– 6 or 10 Kbytes of SRAM

■ Clock, reset and supply management

– 2.0 to 3.6 V application supply and I/Os

– POR, PDR, and programmable voltage detector (PVD)

– 4-to-16 MHz crystal oscillator

– Internal 8 MHz factory-trimmed RC

– Internal 40 kHz RC

– PLL for CPU clock

– 32 kHz oscillator for RTC with calibration

■ Low power

– Sleep, Stop and Standby modes

– VBAT supply for RTC and backup registers

■ 2 x 12-bit, 1 μs A/D converters (up to 16 channels)

– Conversion range: 0 to 3.6 V

– Dual-sample and hold capability

– Temperature sensor

■ DMA

– 7-channel DMA controller

– Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs

■ Up to 51 fast I/O ports

– 26/37/51 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

■ Debug mode

– Serial wire debug (SWD) & JTAG interfaces

■ 6 timers

– Two 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

– 16-bit, motor control PWM timer with deadtime generation and emergency stop

– 2 watchdog timers (Independent and Window)

– SysTick timer 24-bit downcounter

■ 6 communication interfaces

– 21 x I2C interface (SMBus/PMBus)

– 2 × USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)

– 1 × SPI (18 Mbit/s)

– CAN interface (2.0B Active)

– USB 2.0 full-speed interface

■ CRC calculation unit, 96-bit unique ID

■ Packages are ECOPACK®

STM32F103CBT6

DATA SHEET:

STM32F103CBT6.pdf

Features

■ ARM 32-bit Cortex™-M3 CPU Core

– 72 MHz maximum frequency,

1.25 DMIPS/MHz (Dhrystone 2.1)

performance at 0 wait state memory access

– Single-cycle multiplication and hardware division

■ Memories

– 64 or 128 Kbytes of Flash memory

– 20 Kbytes of SRAM

■ Clock, reset and supply management

– 2.0 to 3.6 V application supply and I/Os

– POR, PDR, and programmable voltage detector (PVD)

– 4-to-16 MHz crystal oscillator

– Internal 8 MHz factory-trimmed RC

– Internal 40 kHz RC

– PLL for CPU clock

– 32 kHz oscillator for RTC with calibration

■ Low power

– Sleep, Stop and Standby modes

– VBAT supply for RTC and backup registers

■ 2 x 12-bit, 1 μs A/D converters (up to 16 channels)

– Conversion range: 0 to 3.6 V

– Dual-sample and hold capability

– Temperature sensor

■ DMA

– 7-channel DMA controller

– Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs

■ Up to 80 fast I/O ports

– 26/37/51/80 I/Os, all mappable on 16

external interrupt vectors and almost all 5 V-tolerant

■ Debug mode

– Serial wire debug (SWD) & JTAG interfaces

■ 7 timers

– Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and

quadrature (incremental) encoder input

– 16-bit, motor control PWM timer with deadtime generation and emergency stop

– 2 watchdog timers (Independent and Window)

– SysTick timer 24-bit downcounter

■ Up to 9 communication interfaces

– Up to 2 x I2C interfaces (SMBus/PMBus)

– Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)

– Up to 2 SPIs (18 Mbit/s)

– CAN interface (2.0B Active)

– USB 2.0 full-speed interface

■ CRC calculation unit, 96-bit unique ID

■ Packages are ECOPACK®

STM32F103C4T6A

DATA SHEET: 

CD00210843.pdf

Features

■ ARM 32-bit Cortex™-M3 CPU Core

– 72 MHz maximum frequency,

1.25 DMIPS/MHz (Dhrystone 2.1)

performance at 0 wait state memory

access

– Single-cycle multiplication and hardware

division

■ Memories

– 16 or 32 Kbytes of Flash memory

– 6 or 10 Kbytes of SRAM

■ Clock, reset and supply management

– 2.0 to 3.6 V application supply and I/Os

– POR, PDR, and programmable voltage

detector (PVD)

– 4-to-16 MHz crystal oscillator

– Internal 8 MHz factory-trimmed RC

– Internal 40 kHz RC

– PLL for CPU clock

– 32 kHz oscillator for RTC with calibration

■ Low power

– Sleep, Stop and Standby modes

– VBAT supply for RTC and backup registers

■ 2 x 12-bit, 1 μs A/D converters (up to 16

channels)

– Conversion range: 0 to 3.6 V

– Dual-sample and hold capability

– Temperature sensor

■ DMA

– 7-channel DMA controller

– Peripherals supported: timers, ADC, SPIs,

I2Cs and USARTs

■ Up to 51 fast I/O ports

– 26/37/51 I/Os, all mappable on 16 external

interrupt vectors and almost all 5 V-tolerant

Debug mode

– Serial wire debug (SWD) & JTAG interfaces

■ 6 timers

– Two 16-bit timers, each with up to 4

IC/OC/PWM or pulse counter and

quadrature (incremental) encoder input

– 16-bit, motor control PWM timer with deadtime

generation and emergency stop

– 2 watchdog timers (Independent and

Window)

– SysTick timer 24-bit downcounter

■ 6 communication interfaces

– 21 x I2C interface (SMBus/PMBus)

– 2 × USARTs (ISO 7816 interface, LIN, IrDA

capability, modem control)

– 1 × SPI (18 Mbit/s)

– CAN interface (2.0B Active)

– USB 2.0 full-speed interface

■ CRC calculation unit, 96-bit unique ID

■ Packages are ECOPACK®

STM8S-discovery 키트

■ STM8S105C6T6 microcontroller, 32 KB Flash, 2 KB RAM, 1 KB EEPROM

■ Powered by USB cable between PC and STM8S-DISCOVERY

■ Selectable power of 5 V or 3.3 V

■ Touch sensing button

■ User LED

■ Extension header for all I/Os

■ Wrapping area for users own application

■ Embedded ST-Link

■ USB interface for programming and debugging

■ SWIM debug support

DATA BRIEF

APPLICATION NOTES

LICENSE AGREEMENTS

USER MANUALS

USB-FS-Device development kit User's Manual     

매뉴얼 다운로드:

stm32_USB-FS-Device development kit.pdf

STM32 의 USB 에 관련된 매뉴얼입니다.

아래와 같은 내용이 포함되어 있습니다.

STM32 USB-FS-Device firmware library

Joystick mouse demo

Custom HID demo

Device firmware upgrade

Mass storage demo

Virtual COM port demo

USB voice speaker demo

USB audio streaming demo

STM32 Virtual COM Port Driver

다른 칩셋과 마찬가지로 STM32 로 작성된 가상 COM 포트 드라이버를 사용하기 위해서는 별도의 드라이버를 설치해야 합니다.

드라이버가 설치되지 않았다면 아래와 같이 드라이버 인식을 실패합니다.

함께 제공하는 설치정보파일( iarvircomport.inf)로 설치를 시도해도 제대로 인식하지 못할 수 있습니다.

STM32 Virtual COM Port Driver 설치

드라이버 설치파일:

stm32_vcp_win7_64bit..zip

stm32_vcp_xp_32bit..zip

또는 http://www.st.com/internet/mcu/product/164491.jsp 에서 다운 받을 수 있습니다.

압축 파일을 풀면 4개의 파일이 있습니다.

(비스타 또는 7 에서는 필히 압축을 푼후 관리자모드로 설치를 해야 합니다.)

현재 사용중인 OS에 맞는 드라이버를 설치하면 됩니다.

VCP_V1.3.1_Setup.exe: 32비트용 드라이버

VCP_V1.3.1_Setup_x64.exe: 64비트용 드라이버

여기서는 64비트용을 설치해보겠습니다.

그리고, USB 케이블을 다시 연결해도 자동으로 설치되지는 않는다면 수동으로 설치해야 하는데, 아래처럼 직접 경로를 지정하여 처리할 수 있습니다.

경로를 C:\Program Files (x86)\STMicroelectronics\Software\Virtual COM Port Driver 로 지정합니다.

해당 파일에 게시자 정보가 없어 경고가 나타날 수 있습니다.

해당 제품을 사용하려면 당연히 설치해야 합니다.