ST-LINK/V2

ST-Link V2는 ST Microelectronics의 STM8 and STM32 Microcontroller Families의 모든 제품에 사용 가능한 In-Circuit Debugger and Programmer 입니다. JTAG/SWD인터페이스를 이용해서 STM8 와 STM32에 프로그램 라이팅, 디버깅을 할 수 있습니다

 

 

특징

  • 5 V power supplied by USB connector.
  • USB 2.0 full speed interface compatible.
  • USB standard A to Mini-B cable provided.
  • SWIM specific features:
    • 1.65 V to 5.5 V application voltage supported on SWIM interface.
    • SWIM low speed and high speed modes supported.
    • SWIM programming speed rate:
      • 9.7 Kbytes/s in low speed,
      • 12.8 Kbytes/s in high speed.
    • SWIM cable for connection to an application with an ERNI standard connector vertical (ref: 284697 or 214017) or horizontal (ref: 214012).
    • SWIM cable for connection to an application with pin headers or 2.54 mm pitch connector.
  • JTAG/serial wire debugging (SWD) specific features:
    • 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs.
    • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
    • JTAG supported
    • SWD and serial wire viewer (SWV) communication supported
  • Direct firmware update feature supported (DFU)
  • Status LED which blinks during communication with the PC
  • Operating temperature 0 to 50 °C
  • 2500 VRMS high isolation voltage (ST-LINK/V2-ISOL only)

 

핀번호

 

드라이버

최신 ST-Link V2 드라이버는 화이트앳 ST-Link 드라이버 자료실(http://whiteat.com/index.php?mid=sw_pds&package_srl=228213) 에서 받으실수 있습니다.

 

사용예

ST-LINK V2 는 STM32 ST-LINK Utility ,  KEIL uVision 에서 사용할 수 있습니다.

 

연결

컴퓨의 USB에 USB 케이블을 연결하고 20핀 플랫케이블은 STM8 또는 STM32 보드에 연결합니다.

ST-LINK 에서는 보드에 전원을 공급해주지 않습니다. 필히 보드에 별도의 전원을 공급해줘야 합니다.

 

STM32 ST-LINK Utility 에서 사용

STM32 ST-LINK Utility 로 ST-LINK V2 를 사용하는 방법입니다.

http://docs.whiteat.com/?p=3048  

   

  

 

 


KEIL uVision에서 사용

KEIL uVision 로 ST-LINK V2 를 사용하는 방법입니다.

http://docs.whiteat.com/?p=3050

   

   

   

 

제품 구매

ST-LINK V2 제품은 http://kit128.com/goods/view?no=189 에서 구매하실 수 있습니다.


'전자 키트' 카테고리의 다른 글

WAT-LED  (0) 2013.04.08
WAT-AT45DB SPI 데이터 플래시  (0) 2013.04.08
WAT-GLCD 그래픽 모노 LCD 모듈  (0) 2011.12.12
WAT-CLCD, 캐릭터 LCD 모듈  (0) 2011.10.31
PONYPROG 사용방법, 라이팅 속도 향상시키는 방법 포함  (0) 2011.10.02
Posted by WhiteAT

댓글을 달아 주세요

USB2.0 MINI 5p cable 미니5핀 케이블

USB2.0 MINI 5p cable 미니5핀 케이블.

 

 

USB 2.0 미니 5핀 케이블입니다.

  • 길이 : 1m
  • 커넥터1: USB-A Male
  • 커넥터2: USB Mini-B Male
  • 버전: USB 2.0 High Speed

 

 

 

제품 구매

USB 2.0 Mini 5pin cable 미니 케이블 은  http://kit128.com/goods/view?no=264 에서 구매하실 수 있습니다.


'전자/일반' 카테고리의 다른 글

작은 십자 드라이버  (0) 2016.04.20
빵판에서 사용 가능한 푸쉬,리셋 스위치  (0) 2016.04.20
다양한 저항 종류 – 용량  (0) 2016.03.31
체리, ON/OFF 제어 방식  (2) 2012.11.28
PID 제어  (4) 2012.11.28
Posted by WhiteAT

댓글을 달아 주세요

 

1/8W 저항

0.125W 저항은 작은 사이즈에 작은 용량이라 매우 작은 전력에 사용해야 합니다.

   

   

1/4 W 저항

0.25W 저항은 일반적으로 많이 사용되는 저항으로 주로 탄소피막저항 입니다.

'전자/일반' 카테고리의 다른 글

빵판에서 사용 가능한 푸쉬,리셋 스위치  (0) 2016.04.20
USB2.0 MINI 5p cable 미니5핀 케이블  (0) 2016.03.31
체리, ON/OFF 제어 방식  (2) 2012.11.28
PID 제어  (4) 2012.11.28
서보 모터 제어 방법  (1) 2012.11.15
Posted by WhiteAT

댓글을 달아 주세요